Indications for zygomatic implants: a systematic review
The purpose of this systematic review was to assess the evidence regarding the indications for placement of zygomatic implants to rehabilitate edentulous maxillae.
Page 2 of 11
The purpose of this systematic review was to assess the evidence regarding the indications for placement of zygomatic implants to rehabilitate edentulous maxillae.
To evaluate how peri-implant hard and soft tissue height (BH, MH) alter after final prostheses placement related to labial hard and soft tissue thickness (BW, MW).
The purpose of this document is to clarify the biomechanical principles involved when zygoma implants are placed under functional loads.
This study aims to examine the effect of the size of the intraoral scanning area on implant position reproducibility and compare the implant position reproducibility of plaster models fabricated using the sili...
Emerging clinical data points to the relevance of the presence of keratinized tissue (KT). Although apically positioned flap/vestibuloplasty along with free gingival graft (FGG) is considered as a standard int...
A patient with extensive atrophy of the alveolar ridge in the posterior portion of the maxilla was selected to complete an experimental and clinical case of the robotic zygomatic implant to investigate the via...
To assess the outcome [zygomatic implant (ZI) survival] and complications of the original surgical technique (OST) and an Anatomy-Guided approach (AGA) in the placement of ZI in patients with severely atrophic...
To evaluate the effectiveness of an erbium, chromium:yttrium–scandium–gallium–garnet (Er,Cr:YSGG) laser with side-firing tip in decontamination of titanium (Ti) disc.
The aim of the present study was to evaluate the long-term effectiveness of a xenogeneic collagen matrix (CM) in pre-prosthetic augmentation of the keratinized mucosa width (KMW) at implant sites.
The study aims to use cone beam computed tomography (CBCT) to (1) define the virtual valid length of pterygoid implants in maxillary atrophic patients from the prosthetic prioritized driven position and (2) me...
An experimental approach was designed to measure the preload force, the coefficient of friction and the component of the tightening torque that is needed to surmount the thread-friction in an implant–abutment–...
The aim of this retrospective comparative study was to evaluate the survival of dental implants placed in the posterior maxilla with a residual bone height less than 3 mm using a one-stage lateral sinus liftin...
The current study investigates the effect of immediate temporization on the pink esthetics of delayed implants in patients with thin gingival phenotype in combination with a De-epithelialized Free Gingival Gra...
This in vitro study aimed at comparing the accuracy of freehand implant placement with static computer-assisted implant surgery (sCAIS), utilizing a keyless and a drill-key implant system and two guide-hole de...
This retrospective cohort study evaluates the regeneration of severe peri-implantitis deficiencies treated with the laser-assisted peri-implant defect regeneration (LAPIDER) approach within a 3-year follow-up.
This study investigates whether edentulous jaw sections in the planned implant position exhibit jaw contours funnel-shaped or exhibit pronounced retraction of the jaw (unusual jaw contours) in the transversal ...
This study aimed to compare the accuracy of fully guided between dynamic and static computer-assisted implant surgery (CAIS) systems for immediate implant placement in the esthetic zone.
To assess the implant and prosthesis survival rates, the clinical, radiographical and patient-related outcome measures, and the masticatory performance of maxillary overdentures supported by two implants in pa...
Japan, with an increasing number of elderly people needing long-term care in a super-aged society, urgent needs to develop the clinical guidelines on implant maintenance for elderly people with declining indep...
The remodeling process following tooth extraction can be observed as horizontal and vertical bone reduction of the alveolar ridge. Preservation procedures such as alveolar ridge preservation (ARP) aim to maint...
To assess the dimensional establishment of a bony envelope after alveolar ridge preservation (ARP) with deproteinized bovine bone mineral (DBBM) in order to estimate the surgical feasibility of standard diamet...
The extensive loss of teeth and surrounding tissues due to mandibulectomy for an oral tumor not only impacts negatively on appearance, but also often causes various functional disorders, decreasing quality of ...
Implant-supported removable partial dentures (ISRPDs) provide effective prosthodontic treatment for partially edentulous patients. ISRPDs offer greater patient satisfaction and better oral function compared wi...
To evaluate the radiographic and peri-implant outcomes of intramobile cylinder implants (IMZs) and the feasibility of long-term follow-up studies after nearly 30 years.
This study used cone-beam computed tomography (CBCT) to analyze the prevalence of several maxillary anatomical/accessory structures, as well as variations within each type, assessing how accurate diagnosis can...
To evaluate the volumetric stability of peri-implant soft and hard tissue prospectively, this study compared immediate versus delayed implants placed in the anterior esthetic region.
To assess implant success and survival of immediately placed and restored progressive-type implants in the esthetic zone.
The present prospective study evaluates the association between new bone formation rate in the iliac onlay graft and sex steroid hormone serum levels.
For biomechanical consideration of dental implants, an understanding of the three-dimensional (3D) load exerted on the implant is essential, but little information is available on the in vivo load, including t...
There is currently a lack of guidelines for clinicians regarding titanium hypersensitivity in implant dentistry. Diagnostic tests such as the epicutaneous test or the lymphocyte transformation test showed inco...
This article describes a case with a full digital procedure to prefabricate an implant-supported interim restoration based on the preoperative digital implant planning. A fully guided surgical template is desi...
The purpose of this study was to investigate serum undercarboxylated osteocalcin (ucOC) levels in partially edentulous patients scheduled to receive implant treatment and determine the association between ucOC...
To investigate the bone augmentation ability of demineralized bone sheets mixed with allogeneic bone with protein fractions containing bioactive substances and the interaction between coexisting bioactive subs...
Allogeneic cortical bone plates (CP) might be used for alveolar ridge augmentation as an alternative to autogenous grafts (AG) and bone substitutes (BS). We report about a multicenter case series and our exper...
The purpose of this study was to evaluate the efficacy of concentrated growth factor (CGF) membrane for the sealing of alveolar socket in alveolar ridge preservation (ARP). A total of 22 patients with 24 alveo...
This study aimed to investigate the performance of novice versus experienced practitioners for placing dental implant using freehand, static guided and dynamic navigation approaches.
Nowadays, 3D planning and static for dynamic aids play an increasing role in oral rehabilitation of the masticatory apparatus with dental implants. The aim of this study is to compare the accuracy of implant p...
The objective of this meta-analysis was to compare the clinical outcomes of using short implants (≤ 8 mm) inserted with osteotome sinus floor elevation (OSFE) and standard implants (≥ 10 mm) inserted with sinu...
The purpose of this study is to compare and analyze the treatment outcomes between two groups which are both immediately placed implant cases, one is immediate loading, and the other is conventional loading gr...
To compare the survival, changes in marginal bone level and prosthetic complications rate of short (≤ 6.5 mm) and longer implants (≥ 7.5) supporting a single-crown restoration in the maxillary/mandibular premo...
Based on the excellent long-term data, dental implants made of titanium are considered the international implantological standard for replacing missing teeth. However, ceramic implants made of zirconia (ZrO2) hav...
To compare the release of platelet-derived growth factor (PDGF), vascular endothelial growth factor (VEGF), insulin-like growth factor (IGF-I) and interleukin 1β (IL-1β) of plasma rich in growth factors (PRGF)...
To determine the clinical and radiological outcomes of hybrid-design- (HD) and bone-level (BL) implants for bar-retained mandibular implant-overdentures (IODs).
To histologically examine early bone formation around transmucosal implants and to evaluate the influence of surface characteristics on early peri-implant bone healing using a miniature pig model. For this, co...
Platelet-rich fibrin (PRF) has been proposed as promising biomaterials with the advantages of host accumulation of platelets and leukocytes with entrapment of growth factors and fibrin scaffold. However, limit...
The patient-centered SafetyCrown-workflow enables the immediate restoration of posterior missing teeth and short free-end situations following one-abutment/one-time within three visits and only one surgical ap...
The objective of the current study was to assess the clinical and radiological outcomes following autologous grafting from the iliac crest treated with autologous stem cells in-situ to reduce the postoperative...