CAD/CAM implant surgical guides: maximum errors in implant positioning attributable to the properties of the metal sleeve/osteotomy drill combination

Apostolakis, Dimitrios; Kourakis, Georgios

doi:10.1186/s40729-018-0146-2

Table 4 Error at the neck (mm)

From: CAD/CAM implant surgical guides: maximum errors in implant positioning attributable to the properties of the metal sleeve/osteotomy drill combination

Sleeve length (mm)	Clearance (μm)	Offset (mm)
Sleeve length (mm)	Clearance (μm)	6	7	8	9	10	11	12	13	14	15	16	17
4	50	0.1	0.1	0.1	0.1	0.1	0.1	0.1	0.1	0.2	0.2	0.2	0.2
	80	0.1	0.1	0.1	0.1	0.2	0.2	0.2	0.2	0.2	0.3	0.3	0.3
	110	0.1	0.1	0.2	0.2	0.2	0.2	0.3	0.3	0.3	0.4	0.4	0.4
	140	0.1	0.2	0.2	0.2	0.3	0.3	0.4	0.4	0.4	0.5	0.5	0.5
	170	0.2	0.2	0.3	0.3	0.3	0.4	0.4	0.5	0.5	0.6	0.6	0.6
	200	0.2	0.3	0.3	0.4	0.4	0.5	0.5	0.6	0.6	0.7	0.7	0.8
	230	0.2	0.3	0.3	0.4	0.5	0.5	0.6	0.6	0.7	0.7	0.8	0.9
	260	0.3	0.3	0.4	0.5	0.5	0.6	0.7	0.7	0.8	0.8	0.9	1.0
	290	0.3	0.4	0.4	0.5	0.6	0.7	0.7	0.8	0.9	0.9	1.0	1.1
	320	0.3	0.4	0.5	0.6	0.6	0.7	0.8	0.9	1.0	1.0	1.1	1.2
	350	0.4	0.4	0.5	0.6	0.7	0.8	0.9	1.0	1.1	1.1	1.2	1.3
	380	0.4	0.5	0.6	0.7	0.8	0.9	1.0	1.0	1.1	1.2	1.3	1.4
	410	0.4	0.5	0.6	0.7	0.8	0.9	1.0	1.1	1.2	1.3	1.4	1.5
5	50		0.0	0.1	0.1	0.1	0.1	0.1	0.1	0.1	0.1	0.1	0.1
	80		0.0	0.1	0.1	0.1	0.1	0.2	0.2	0.2	0.2	0.2	0.2
	110		0.1	0.1	0.1	0.2	0.2	0.2	0.2	0.3	0.3	0.3	0.3
	140		0.1	0.2	0.2	0.2	0.2	0.3	0.3	0.3	0.4	0.4	0.4
	170		0.2	0.2	0.2	0.3	0.3	0.3	0.4	0.4	0.4	0.5	0.5
	200		0.2	0.2	0.3	0.3	0.3	0.4	0.4	0.5	0.5	0.5	0.6
	230		0.2	0.3	0.3	0.3	0.4	0.4	0.5	0.5	0.6	0.6	0.7
	260		0.2	0.3	0.3	0.4	0.4	0.5	0.5	0.6	0.7	0.7	0.8
	290		0.3	0.3	0.4	0.4	0.5	0.6	0.6	0.7	0.7	0.8	0.8
	320		0.3	0.4	0.4	0.5	0.5	0.6	0.7	0.7	0.8	0.9	0.9
	350		0.3	0.4	0.5	0.5	0.6	0.7	0.7	0.8	0.9	0.9	1.0
	380		0.3	0.4	0.5	0.6	0.6	0.7	0.8	0.9	1.0	1.0	1.1
	410		0.4	0.5	0.5	0.6	0.7	0.8	0.9	0.9	1.0	1.1	1.2
6	50			0.0	0.1	0.1	0.1	0.1	0.1	0.1	0.1	0.1	0.1
	80			0.0	0.1	0.1	0.1	0.1	0.1	0.1	0.2	0.2	0.2
	110			0.1	0.1	0.1	0.1	0.2	0.2	0.2	0.2	0.2	0.3
	140			0.1	0.1	0.2	0.2	0.2	0.2	0.3	0.3	0.3	0.3
	170			0.1	0.2	0.2	0.2	0.3	0.3	0.3	0.3	0.4	0.4
	200			0.2	0.2	0.2	0.3	0.3	0.3	0.4	0.4	0.4	0.5
	230			0.2	0.2	0.3	0.3	0.3	0.4	0.4	0.5	0.5	0.5
	260			0.2	0.3	0.3	0.3	0.4	0.4	0.5	0.5	0.6	0.6
	290			0.2	0.3	0.3	0.4	0.4	0.5	0.5	0.6	0.6	0.7
	320			0.3	0.3	0.4	0.4	0.5	0.5	0.6	0.6	0.7	0.7
	350			0.3	0.4	0.4	0.5	0.5	0.6	0.6	0.7	0.8	0.8
	380			0.3	0.4	0.4	0.5	0.6	0.6	0.7	0.8	0.8	0.9
	410			0.3	0.4	0.5	0.5	0.6	0.7	0.8	0.8	0.9	1.0
7	50				0.0	0.0	0.1	0.1	0.1	0.1	0.1	0.1	0.1
	80				0.0	0.1	0.1	0.1	0.1	0.1	0.1	0.1	0.2
	110				0.1	0.1	0.1	0.1	0.1	0.2	0.2	0.2	0.2
	140				0.1	0.1	0.2	0.2	0.2	0.2	0.2	0.3	0.3
	170				0.1	0.2	0.2	0.2	0.2	0.3	0.3	0.3	0.3
	200				0.2	0.2	0.2	0.2	0.3	0.3	0.3	0.4	0.4
	230				0.2	0.2	0.2	0.3	0.3	0.3	0.4	0.4	0.4
	260				0.2	0.2	0.3	0.3	0.4	0.4	0.4	0.5	0.5
	290				0.2	0.3	0.3	0.4	0.4	0.4	0.5	0.5	0.6
	320				0.3	0.3	0.3	0.4	0.4	0.5	0.5	0.6	0.6
	350				0.3	0.3	0.4	0.4	0.5	0.5	0.6	0.6	0.7
	380				0.3	0.4	0.4	0.5	0.5	0.6	0.6	0.7	0.7
	410				0.3	0.4	0.4	0.5	0.6	0.6	0.7	0.7	0.8

Back to article page