Skip to main content

Table 3 Error at the apex (mm) and deviation of implant axis (degrees) for sleeve lengths 6 and 7 mm

From: CAD/CAM implant surgical guides: maximum errors in implant positioning attributable to the properties of the metal sleeve/osteotomy drill combination

Sleeve length (mm) Clearance (μm) Deviation (°) Total length (mm)
16 17 18 19 20 21 22 23 24 25 26 27 28 29
6 50 0.5 0.1 0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2
80 0.8 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3
110 1.1 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.4 0.4 0.4 0.4 0.4 0.5 0.5
140 1.3 0.3 0.3 0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.6 0.6 0.6
170 1.6 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.7 0.7 0.7 0.7
200 1.9 0.4 0.5 0.5 0.5 0.6 0.6 0.6 0.7 0.7 0.7 0.8 0.8 0.8 0.9
230 2.2 0.5 0.5 0.6 0.6 0.7 0.7 0.7 0.8 0.8 0.8 0.9 0.9 1.0 1.0
260 2.5 0.6 0.6 0.7 0.7 0.7 0.8 0.8 0.9 0.9 1.0 1.0 1.0 1.1 1.1
290 2.8 0.6 0.7 0.7 0.8 0.8 0.9 0.9 1.0 1.0 1.1 1.1 1.2 1.2 1.3
320 3.1 0.7 0.7 0.8 0.9 0.9 1.0 1.0 1.1 1.1 1.2 1.2 1.3 1.3 1.4
350 3.3 0.8 0.8 0.9 0.9 1.0 1.1 1.1 1.2 1.2 1.3 1.3 1.4 1.5 1.5
380 3.6 0.8 0.9 1.0 1.0 1.1 1.1 1.2 1.3 1.3 1.4 1.5 1.5 1.6 1.6
410 3.9 0.9 1.0 1.0 1.1 1.2 1.2 1.3 1.4 1.4 1.5 1.6 1.6 1.7 1.8
7 50 0.4   0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2
80 0.7   0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.3
110 0.9   0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.4 0.4 0.4 0.4
140 1.1   0.3 0.3 0.3 0.3 0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5
170 1.4   0.3 0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.6 0.6 0.6
200 1.6   0.4 0.4 0.4 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.7 0.7 0.7
230 1.9   0.4 0.5 0.5 0.5 0.6 0.6 0.6 0.7 0.7 0.7 0.8 0.8 0.8
260 2.1   0.5 0.5 0.6 0.6 0.7 0.7 0.7 0.8 0.8 0.8 0.9 0.9 0.9
290 2.4   0.6 0.6 0.6 0.7 0.7 0.8 0.8 0.8 0.9 0.9 1.0 1.0 1.1
320 2.6   0.6 0.7 0.7 0.8 0.8 0.8 0.9 0.9 1.0 1.0 1.1 1.1 1.2
350 2.9   0.7 0.7 0.8 0.8 0.9 0.9 1.0 1.0 1.1 1.1 1.2 1.2 1.3
380 3.1   0.7 0.8 0.8 0.9 1.0 1.0 1.1 1.1 1.2 1.2 1.3 1.3 1.4
410 3.4   0.8 0.8 0.9 1.0 1.0 1.1 1.1 1.2 1.3 1.3 1.4 1.4 1.5