Skip to main content
International Journal of Implant Dentistry
Fig. 1 | International Journal of Implant Dentistry

Fig. 1

From: Comparative evaluation of the stability of two different dental implant designs and surgical protocols—a pilot study

Fig. 1

Implant design. The OSPTX and OSP implants are manufactured from high-grade commercially pure titanium with surface roughness produced via a fluoride treatment process. The OSP implant is a screw-shaped self-tapping implant. The diameter used in this study was 4.0 mm. The implant length used in this study was 8 mm. The OSPTX implant has the same features as the OSP except the apex of the implant is tapered

Back to article page